Amplifier and pre-amplifier development
WinAudioMLS can measure all relevant parameters. With it's 192kHz and 24Bit high dynamic modes WinAudioMLS is designed for high-end systems.
With the following bundle you can perform all typical measurements:
 |
THD, THD+N, IMD, SNR |
|
Frequency, phase, impulse and step response |
|
Group delay |
|
Impedance |
|
Measurements with MLS and stepped sines |
|
Dual channel processing |
|
Spectrogram |
|
Oscilloscope |
We offer a special bundle for amplifier testing more...
| WinAudioMLS PRO EX | #1721 |
| Signal generator PRO | #1201 |
 |
192kHz/24 Bit ASIO support | #3000 |
|
64-bit ultra high precision FFT | #3005 |
|
Frequency sweep (stepped sine) | #3001 |
For measurements with phono equipment (turntable or RIAA preamplifiers) we recommend.
|
RIAA (and inverse) filter for both the Analyzer and the Signalgenerator. | #3017 |
For special filtering requirements, we offer the flexible filter designer plug-in.
|
Filter designer | #3016 |
Loudspeaker development
With WinAudioMLS you can measure all relevant parameters for loudspeaker development and repair.
With the following bundle you can perform all typical measurements:
|
Distortion |
|
Sensitivity |
|
Frequency, phase, impulse and step response |
|
Group delay |
|
Impedance |
|
Measurements with MLS and stepped sines |
|
Dual channel processing |
|
Basis for TSP calculation and speaker simulation programs (We recommend the freeware program "Basscade") |
| WinAudioMLS PRO EX | #1721 |
| Signal generator PRO | #1201 |
|
Frequency sweep (stepped sine) | #3001 |
For measurements analysis with the "cumulative decay curve" (waterfall) you will need the 3D viewer
|
3D real-time visualization. more info about 3D | #3011 |
Repair of audio equipment
WinAudioMLS can measure all relevant parameters that are needed for repair and adjustment of all kind of audio equipment. With it's 192kHz and 24Bit high dynamic modes WinAudioMLS is designed for high-end systems.
With the following bundle you can perform all typical measurements:
|
THD, THD+N, IMD, SNR |
|
Frequency, phase, impulse and step response |
|
Group delay |
|
Impedance |
|
Wow&flutter |
|
Measurements with MLS and stepped sines |
|
Dual channel processing |
|
Spectrogram |
|
Oscilloscope |
We offer a special bundle for electrical testing more...
| WinAudioMLS PRO EX | #1721 |
| Signal generator PRO | #1201 |
|
192kHz/24 Bit ASIO support | #3000 |
|
64-bit ultra high precision FFT | #3005 |
|
Frequency sweep (stepped sine) | #3001 |
For measurements with tape machines or record players we recommend our speedalyzer plug-in to measure wow&flutter.
|
Speed analysis tool with applications far beyond the traditional wow&flutter analysis more... | #3014 |
For measurements with phono equipment (record player or RIAA preamplifiers) we recommend.
|
RIAA (and inverse) filter for both the Analyzer and the Signalgenerator. | #3017 |
For special filtering requirements, we offer the flexible filter designer plug-in.
|
Filter designer | #3016 |
Filter and network analysis
WinAudioMLS can measure linear and non-linear filtering networks. This includes analog cross-over networks or digital filter processors. You can also measure e.g. generic control loops in the range of DC to 100kHz analog bandwiths.
With the following bundle you can perform all typical measurements:
|
Frequency, phase, impulse and step response |
|
Group delay |
|
Impedance |
|
Distortion |
|
Measurements with MLS and stepped sines |
|
Dual channel processing |
|
Oscilloscope |
We offer a special bundle for electrical testing more...
| WinAudioMLS PRO EX | #1721 |
| Signal generator PRO | #1201 |
|
Frequency sweep (stepped sine) | #3001 |
For special filtering requirements, we offer the flexible filter designer plug-in.
|
Filter designer | #3016 |
For low noise and distortion you may need the 24 Bit modules
|
192kHz/24 Bit ASIO support | #3000 |
|
64-bit ultra high precision FFT | #3005 |
Soundcard tests
WinAudioMLS can measure all relevant parameters for soundcard testings and design. With it's 192kHz and 24Bit high dynamic modes WinAudioMLS is designed for high-end systems.
WinAudioMLS supports the following driver models
|
MME |
|
DirectX |
|
ASIO up to 192kHz 24Bit and 64 channels |
With the following bundle you can perform all typical measurements:
|
THD, THD+N, IMD, SNR |
|
Frequency, phase, impulse and step response |
|
Group delay |
|
Jitter |
|
Impedance |
|
Measurements with MLS and stepped sines |
|
Dual channel processing or optional up to 64 channels |
|
Oscilloscope |
We offer a special bundle for soundcard testing more...
| WinAudioMLS PRO EX | #1721 |
| Signal generator PRO | #1201 |
|
192kHz/24 Bit ASIO support | #3000 |
|
64-bit ultra high precision FFT | #3005 |
|
Frequency sweep (stepped sine) | #3001 |
For measurements with phono inputs you may need
|
RIAA (and inverse) filter for both the Analyzer and the Signalgenerator. | #3017 |
For special filtering requirements, we offer the flexible filter designer plug-in.
|
Filter designer | #3016 |
PA-system adjustments
With WinAudioMLS you can adjust PA systems of any scale including (home) cinema systems.
With the following bundle you can perform all typical measurements:
|
1/1-1/32 octave RTA for equalization |
|
Feedback analysis |
|
Level monitor |
|
Frequency, phase, impulse and step response |
|
Delay measurement |
|
Measurements with MLS, stepped sines and white/pink noise |
|
Dual channel processing |
|
Distortion and noise analysis |
|
Oscilloscope |
| WinAudioMLS PRO EX | #1721 |
| Signal generator PRO | #1201 |
|
1/1-1/32 octave RTA | #3004 |
|
Frequency sweep (stepped sine) | #3001 |
For special filtering requirements, we offer the flexible filter designer plug-in.
|
Filter designer | #3016 |
PA-system/studio monitoring
With WinAudioMLS you can adjust PA systems of any scale and (home) cinema systems.
With the following bundle you can perform all typical measurements:
|
1/1-1/32 octave RTA |
|
Feedback analysis |
|
Long term level monitor |
|
Spectrogram |
|
Vectorscope |
|
Oscilloscope |
|
Powerful 3D visualization |
|
Dual channel processing or optional up to 64 channels |
|
Distortion and noise analysis |
| WinAudioMLS PRO EX | #1721 |
|
1/1-1/32 octave RTA | #3004 |
|
Vectorscope | #3015 |
|
3D real-time visualization. more info about 3D | #3011 |
For special filtering requirements, we offer the flexible filter designer plug-in.
|
Filter designer | #3016 |
Environmental noise analysis
With WinAudioMLS you can measure all kind of noise and sound sources. You can perform short term analysis or long term level monitoring.
With the following bundle you can perform all typical measurements:
|
1/1-1/32 octave RTA |
|
Different weighting option |
|
Different averaging options |
|
Long term level monitor |
|
Spectrogram |
|
Oscilloscope |
|
Powerful 3D visualization |
|
Dual channel processing or optional up to 64 channels |
|
Psycho-acoustic loudness measurement in sone (ISO532B) |
|
Identification of tonal components (DIN45681) |
| WinAudioMLS PRO | #1720 |
For dual channel processing you will require the EX version.
|
1/1-1/32 octave RTA | #3004 |
|
Loudness measurements (sone) according to DIN 45631 ISO 532B | #3010 |
|
3D real-time visualization. more info about 3D | #3011 |
|
Determination of tonal components of noise and determination of a tone adjustment for the assessment of noise immissions according to DIN45681. more | #3019 |
For special filtering requirements, we offer the flexible filter designer plug-in.
|
Filter designer | #3016 |
Vibration+rotating system analysis
This setup is similar to the noise setup. In addition we emphazise the speedalyzer for any rotating equipment (generator, engines etc.)
|
Speed analysis tool more... | #3014 |
Room acoustics
With WinAudioMLS you can measure all kind of room acoustic parameters via powerful MLS techniques.
With the following bundle you can perform all typical measurements:
|
Reverberation time (RT30 RT60) with 1/1-1/3 octave resolution |
|
Room impulse response |
|
Energy decay plot |
|
Measurement via MLS, stopped noise or shots |
We offer a special bundle for room acoustics more...
| WinAudioMLS PRO | #1720 |
| Signal generator PRO | #1201 |
|
Reverberation time with MLS | #3003 |
If you require STI and RASTI you will need the following module.
|
Objective speech transmission measurement with STI and RASTI according to IEC60268-16 | #3009 |
Building acoustics
With WinAudioMLS you can measure parameters which are relevant for building acoustics.
With the following bundle you can perform all typical measurements:
|
Attenuation of walls or windows |
|
Reverberation time (RT30 RT60) with 1/1-1/3 octave resolution |
|
Room impulse response |
|
Energy decay plot |
|
Noise level |
|
Long-term level monitor |
|
Different option for averaging |
|
Dual channel processing |
|
Measurement via MLS, stopped noise or shots |
We offer a special bundle for room acoustics more...
| WinAudioMLS PRO EX | #1721 |
| Signal generator PRO | #1201 |
|
Reverberation time with MLS | #3003 |
|
1/1-1/32 octave RTA | #3004 |
Industrial production tests
WinAudioMLS is a very powerful tool for analysis of various system parameters. In addition it is optimized for full automatic production tests.
|
Rich set of Pass/Fail criteria |
|
Automatic report generation |
|
High resolution option available |
|
Full custom designs are possible |
|
Controllable via scripts |
| WinAudioMLS PRO EX | #1721 |
| Signal generator PRO | #1201 |
|
Automatic Production tests for Quality checks more... | #3018 |
|
1/1-1/32 octave RTA | #3004 |
|
Automating WinAudioMLS with script engine | #3008 |
|
Frequency sweep (stepped sine) | #3001 |
For low noise and distortion you may need the 24 Bit modules
|
192kHz/24 Bit ASIO support | #3000 |
|
64-bit ultra high precision FFT | #3005 |
For special filtering requirements, we offer the flexible filter designer plug-in.
|
Filter designer | #3016 |
Education
WinAudioMLS offers highly sophisticated measurement techniques. Together with it's visualization techniques it is widely used for educational purposes in different areas for electrical engineering and acoustics.
We offer special educational packets at discounted price including classroom kits. Please contact us for details